智能设备 无人工厂 CCD视觉监控揭秘汽车制造的“未来”
时间:2019-10-14 10:44 来源:未知 作者:qingting
点击:次
智能设备 无人工厂 CCD视觉监控揭秘汽车制造的“未来”
汽车检测仪，也称汽车诊断电脑，它是运用现代检测技术、电子技术、计算机应用技术，对汽车实施不解体检测、诊断的一种汽车维修设备。
Car detector, also known as the car diagnostic computer, it is the use of modern detection technology, electronic technology, computer application technology, the implementation of the car does not disassemble detection, diagnosis of a car maintenance equipment.
汽车检测仪可以检测、诊断出车辆的各种性能参数，为全面、准确评价汽车的技术状况、使用性能提供可靠依据;通过汽车电脑的故障码能快速查出可能出现故障的状况，为故障排除提供信息。
汽车底盘的技术状况 直接关系到整车形式的安全操作稳定性 同时还影响发动机的动力传递的燃油的消耗
The technical condition of automobile chassis is directly related to the safety and stability of the vehicle form and also affects the fuel consumption of engine power transmission.
常用的底盘检测设备有:传动系游动角度检测仪 前轮定位仪 四轮定位仪 车论动平衡仪 悬架和转向系检测仪及悬挂装置检测台等
蜻蜓智能（中泽智能）成立于2018年，是国内领先的高新技术企业，聚焦定制，致力成为全球一流的工业自动化设备提供商，为各行业提供完整的自动化视觉及测试解决方案。
汽车上的大多数传感器信号都会通过CAN/LIN总线传输到ECU控制器，ECU对数据进行处理后，又会通过CAN/LIN总线对执行机构发出控制信号，使各部件按照要求正常工作。如果某个部件工作异常，就需要判断是否是总线传输过程出了问题。
Most sensor signals in the car will be transmitted to the ECU controller through the CAN/LIN bus. After the ECU processes the data, it will send control signals to the actuator through the CAN/LIN bus to make the components work normally as required. If something is not working properly, you need to determine if there is a problem with the bus transfer.
Most sensor signals in the car will be transmitted to the ECU controller through the CAN/LIN bus. After the ECU processes the data, it will send control signals to the actuator through the CAN/LIN bus to make the components work normally as required. If something is not working properly, you need to determine if there is a problem with the bus transfer.
汽车检测仪，也称汽车诊断电脑，它是运用现代检测技术、电子技术、计算机应用技术，对汽车实施不解体检测、诊断的一种汽车维修设备。
Car detector, also known as the car diagnostic computer, it is the use of modern detection technology, electronic technology, computer application technology, the implementation of the car does not disassemble detection, diagnosis of a car maintenance equipment.
汽车检测仪可以检测、诊断出车辆的各种性能参数，为全面、准确评价汽车的技术状况、使用性能提供可靠依据;通过汽车电脑的故障码能快速查出可能出现故障的状况，为故障排除提供信息。
Automobile detector can detect and diagnose various performance parameters of the vehicle, and provide reliable basis for comprehensive and accurate evaluation of the vehicle's technical status and performance. Through the fault code of the car computer, it can quickly find out the possible situation of the fault and provide information for troubleshooting.
一般的汽车检测仪具备读汽车故障码、读动态数据流和动作测试、显示传感器波形、控制电脑编码等功能，有的还具备PDA的功能。
一般的汽车检测仪具备读汽车故障码、读动态数据流和动作测试、显示传感器波形、控制电脑编码等功能，有的还具备PDA的功能。
General auto detector has the function of reading auto fault code, reading dynamic data flow and motion test, displaying sensor waveform, controlling computer coding, and some also have the function of PDA.
汽车检测设备大多数是计量检测仪器，采用这种操作的检测方式时，存在检测不规范、采集的数据量少、数据不统一、数据有遗漏等问题，导致检测结果不够准确，从而导致不合格车辆(如事故车、发动机不良的车、底盘刮碰的车、机构损坏的车等)流入市场。
汽车检测设备大多数是计量检测仪器，采用这种操作的检测方式时，存在检测不规范、采集的数据量少、数据不统一、数据有遗漏等问题，导致检测结果不够准确，从而导致不合格车辆(如事故车、发动机不良的车、底盘刮碰的车、机构损坏的车等)流入市场。
Automobile testing equipment mostly measurement detecting instrument, using the operation way of testing, there test specification, less the amount of data collected, the data is not unified, there are omissions, lead to test result is not accurate, resulting in substandard vehicles (such as car accidents, engine, chassis bruised car, damage to the agency, etc.) into the market.
常用底盘及整车检测与诊断设备：
发动机检测设备 底盘检测设备 电气与电子控制系统检测设备 整车性能检测设备
常用底盘及整车检测与诊断设备：
发动机检测设备 底盘检测设备 电气与电子控制系统检测设备 整车性能检测设备
Engine testing equipment chassis testing equipment electrical and electronic control system testing equipment vehicle performance testing equipment.
发动机检测 一般分为综合性能检测和发动机台架试验
Engine testing is generally divided into comprehensive performance testing and engine bench testing.
发动机检测 一般分为综合性能检测和发动机台架试验
Engine testing is generally divided into comprehensive performance testing and engine bench testing.
汽车底盘的技术状况 直接关系到整车形式的安全操作稳定性 同时还影响发动机的动力传递的燃油的消耗
The technical condition of automobile chassis is directly related to the safety and stability of the vehicle form and also affects the fuel consumption of engine power transmission.
常用的底盘检测设备有:传动系游动角度检测仪 前轮定位仪 四轮定位仪 车论动平衡仪 悬架和转向系检测仪及悬挂装置检测台等
The commonly used chassis detection equipment includes: transmission system swimming Angle detection instrument front wheel positioning instrument four wheel positioning instrument car theory dynamic balance instrument suspension and steering system detection instrument and suspension device detection platform.
汽车电气与电子控制系统 主要检测设备有 汽车万用表 汽车示波器 岁车诊断系统 传感器模拟测试仪 故障解码器等
汽车电气与电子控制系统 主要检测设备有 汽车万用表 汽车示波器 岁车诊断系统 传感器模拟测试仪 故障解码器等
Automobile electrical and electronic control system mainly test equipment including automobile multimeter automobile oscilloscope automobile diagnosis system sensor simulation tester fault decoder.
整车性能检测设备 底盘测功机 五轮仪 油耗仪 轴重仪 制动试验台 前照灯检测仪 车速表试验台 废气分析仪 烟度计 声级计等
Vehicle performance testing equipment chassis dynamometer five-wheel meter fuel consumption meter axle weight meter brake test-bed headlight detector speedometer test-bed exhaust gas analyzer smoke meter sound level meter.
整车性能检测设备 底盘测功机 五轮仪 油耗仪 轴重仪 制动试验台 前照灯检测仪 车速表试验台 废气分析仪 烟度计 声级计等
Vehicle performance testing equipment chassis dynamometer five-wheel meter fuel consumption meter axle weight meter brake test-bed headlight detector speedometer test-bed exhaust gas analyzer smoke meter sound level meter.
蜻蜓智能（中泽智能）成立于2018年，是国内领先的高新技术企业，聚焦定制，致力成为全球一流的工业自动化设备提供商，为各行业提供完整的自动化视觉及测试解决方案。
产品服务于汽车电子、手机电脑、家电、医疗大健康等制造型企业的全自动装配整线自动化设备的集成应用，标准化设备的研发、生产、销售的高新技术型企业。
公司将于目前成熟的标准设备的优势及庞大的研发、生产、售后服务团队，蜻蜓智能（中泽智能）将至力于成为整线自动化设备集成应用行业的领军企业。公司继续遵循“品质、创新、服务、责任”的经营理念，秉持着“成就客户，成就员工”的价值观，与您携手共进，再创辉煌！
联系方式
24小时服务热线: 400-808-8697
东莞蜻蜓智能科技：www.keetops.com
广东中泽智能装备：www.tonbost.com
阿里巴巴网址：keetops.1688.com
接待热线 ：0769-83977797
业务专线： 133-0261-9859
技术专线： 133-0261-8569
售后专线： 133-0261-3179
总部地址：广东省 东莞市 常平镇 黄竹园工业区
非标定制设备、自动焊锡机、自动点胶机、自动锁螺丝机、自动组装设备
东莞蜻蜓智能科技：www.keetops.com
广东中泽智能装备：www.tonbost.com
阿里巴巴网址：keetops.1688.com
接待热线 ：0769-83977797
业务专线： 133-0261-9859
技术专线： 133-0261-8569
售后专线： 133-0261-3179
总部地址：广东省 东莞市 常平镇 黄竹园工业区
非标定制设备、自动焊锡机、自动点胶机、自动锁螺丝机、自动组装设备
本页关键词智能,设备,无人,工厂,CCD,视觉,监控,揭秘,汽车,制造